The CNC five-axis centerless grinder feeder is a high-pressure hydrostatic CNC five-axis centerless grinder. It is used with a special feeder to realize automatic grinding of the workpiece. By matching and connecting with the system, combining domestic and foreign grinding machine control technology and field experience to design a system program, it has the function of automatic compensation after grinding wheel consumption and dressing, setting experience parameters to adjust the feed of the table to adjust the outer diameter of the workpiece and control the workpiece Geometrical accuracy. At the same time, it has the functions of counting statistics, alarming before the grinding wheel, stopping (detecting) the first piece after the grinding wheel, and continuous functions.
This centerless grinder feeder has a wealth of alarm protection functions, which guides users to perform simple troubleshooting, simplifies complex procedures, professional control interfaces, simple processing parameters, and even non-professionals can be qualified for processing production with a little training Reduce professional human resources investment and reduce human resource costs. The feeding and receiving method uses a stepping feeding and receiving machine, and the workpiece is sent to the grinding position by a robot. The feeder is equipped with a manual adjustment screw. After the grinding wheel is worn, the screw can be adjusted manually to adjust the position of the workpiece to suit the grip of the robot.
After the workpiece of the centerless grinder feeder is clamped by the robot to the grinding position, the electric cylinder is pushed to move the workpiece to the clamping position. When the workpiece in the storage area is clamped, the storage area Move, the next workpiece storage area reaches the position to be clamped, and reciprocates. The gripping position of the manipulator can be adjusted, and the length of the workpiece can be clamped in the range of 60-70mm. After one end of the workpiece is ground, the robot grips the workpiece on the turning mechanism. After the turning mechanism rotates the workpiece, the robot grips the workpiece to the grinding position and grinds the other end of the workpiece.